JVC EXAD KD-AV7001 Bedienungsanleitung Seite 84

• When an optional monitor is connected to the
AV OUTPUT terminal, you can view the
following MP3 CONTROL screen on the
optional monitor.
MP3 CONTROL REPEAT TRACK
Folder : 01 / 10
spring
sumer
fall
winter
sea
Title :
Begonia
Artist :
Annie Lim
Album :
Flowers
4
1 Currently activated play mode
2 Elapsed playing time of the current track
3 Cursor (highlighted position): Indicates your
selection.
4 ID3 Tag information
5 Folder column—folder names
(Ex. The first folder is selected out of 10
folders.)
• Only 5 folders can be listed at a time.
6 Track column—track names
(Ex. The first track is selected out of 30 tracks
in the current folder. 128 tracks are included
in the disc.)
• Only 12 tracks can be listed at a time.
• Only the first 32 characters can be
displayed on the monitor.
– While playing a CD, the current track
and playback mode information is
displayed on the optional monitor.
84
1 3
2
Time : 00:03:08
Track : 01 / 30 (Total 128)
begonia.mp3
german chamomile.mp3
kiwi fruit.mp3
orchard grass.mp3
petunia.mp3
north pole.mp3
begonia2.mp3
german chamomile2.mp3
kiwi fruit2.mp3
orchard grass2.mp3
petunia2.mp3
north pole2.mp3
6
5
○ ○ ○ ○ ○ ○ ○ ○ ○
Dual Mode Operations
Adjusting AV OUTPUT volume
• This adjustment does not affect the volume
level of the monitor inserted into the optional
cradle (KV-CR100/KV-CR101).
○ ○ ○ ○ ○ ○ ○ ○ ○
Surround Mode Operations
• Dolby Digital disc is not always encoded as
multi-channel source. If it is not multi-
channel encoded, "Dolby Digital" cannot be
selected for surround mode.
○ ○ ○ ○ ○ ○ ○ ○ ○
Sound Mode (iEQ) Operations
• If you do not want to store your current
adjustment, but only to apply the adjustment
to the current playback source, press
RETURN on the monitor screen to go back to
the operation screen of the current source.
Adjustment you made remains effective until
you select a sound mode.
○ ○ ○ ○ ○ ○ ○ ○ ○
Other Sound Adjustments
• If fader or balance has been set close to its
extreme, appropriate surround/DSP effect
may not be obtained.
• If you are using a two-speaker system, set the
fader level to "0."
• You cannot adjust the input level—Volume
Adjustment—of the FM stations. If the
source is FM, Volume Adjustment will not be
used.