External Component Operations
You can connect two video components as
the playback components and an optional TV
tuner unit (KV-C1001).
• When you connect the video camera as a
rear view camera to the AV INPUT 2 jacks
to guide you to back the car, set the usage
of the AV INPUT 2 jacks correctly (see
page 57).
• For connections, see the Installation/
Connection Manual (separate volume).
1
Select the external source
TUNER
DAB CD-CH
• AV1:
To watch the playback pictures
through the component
connected to the AV INPUT 1
jacks.
• AV2:
To watch the playback pictures
through the component
connected to the AV INPUT 2
jacks.
Playback picture will be
shown in the picture
view window.
Not available while viewing the
playback picture.
Ex. When "AV1" is selected.
DISC
AV1
TV
AV2
• TV:
To watch TV programs through
the TV tuner unit (KV-C1001).
Playback picture will be
shown in the picture
view window.
To use the TV tuner unit (KV-C1001), see
the following pages.
2
Adjust the volume
To change the aspect ratio...
On the remote
controller
ASPECT
• For details, see page 29.
When you selected "CAMERA" for "AV2
INPUT" (see page 57), you cannot change
the aspect ratio of AV2.
On the main unit
67