First Use; Setting The Water Softener - Electrolux GA60GXI202 Benutzerinformation

78 electrolux
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
Press the On/Off button, if the programme
selection button light comes on and the
washing programme duration (in minutes)
appears in the digital display, the last per-
formed or selected programme is still set. In
this case, to return to setting mode, the pro-
gramme has to be cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until the 2 horizontal
bars appear in the digital display. The pro-
gramme has been cancelled and the appli-
ance is now in setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing:
– setting of the water softener,
– end of the washing programme,

First use

Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level

Setting the water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
All manuals and user guides at all-guides.com
– intervention of an alarm due to malfunction
Deactivation/activation of the audible
signals
1. Press the On/Off button. The dishwasher
2. Simultaneously press and hold the func-
3. Press function button C , the lights of
4. To change the setting, press function
5. 5. To memorize the operation, switch off
• Pour 1 litre of water into the salt container
• Fill the rinse aid dispenser
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
of the machine.
Factory setting: audible signals activated
It is possible to deactivate the audible
signals.
must be in setting mode.
tion buttons B and C until the lights of
function buttons A , B and C start flash-
ing.
function buttons A and B go off while the
light of function button C goes on flash-
ing. The digital display shows the current
level.
Audible signals deactivated
Audible signals activated
button C again; the digital display will
show the new setting.
the dishwasher by pressing the On/Off
button.
and then fill with dishwasher salt
If you want to use combi detergent
tablets such as: '3 in 1', '4 in 1', '5 in
1' etc. set the multitab function. (Re-
fer to 'Multitab function').
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.