First Use; Setting The Water Softener - Electrolux GA60LXI102 Benutzerinformation

Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme,
• activation/deactivation of the Multitab
function,
• activation/deactivation of the rinse aid dis-
penser when Multitab function is active.
Setting mode
Press the On/Off button. If ALL programme
button lights come on, the appliance is in
setting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,

First use

Before using your dishwasher for the first
time:
• Ensure that the electrical and water con-
nections comply with the installation in-
structions
• Remove all packaging from inside the ap-
pliance
• Set the water softener level

Setting the water softener

The dishwasher is equipped with a water
softener designed to remove minerals and
salts from the water supply, which would
have a detrimental or adverse effect on the
operation of the appliance.
The higher the content of these minerals and
salts, the harder your water is. Water hard-
ness is measured in equivalent scales, Ger-
man degrees (dH°), French degrees (°TH)
and mmol/l (millimol per litre - international
unit for the hardness of water).
Water hardness
°dH
51 - 70 91 - 125
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
°TH mmol/l
9,1 - 12,5
76 - 90 7,6 - 9,0
65 - 75 6,5 - 7,5
51 - 64 5,1 - 6,4
40 - 50 4,0 - 5,0
33 - 39 3,3 - 3,9
26 - 32 2,6 - 3,2
– setting the water softener level,
– activating/deactivating the rinse aid
dispenser,
the appliance MUST be in setting mode.
Press the On/Off button. If a programme but-
ton light is on, the last performed or selected
programme is still set. In this case, to return
to setting mode, the programme has to be
cancelled.
To cancel a set programme or a
programme in progress
Simultaneously press and hold the two func-
tion buttons B and C until all the programme
button lights come on. The programme has
been cancelled and the machine is now in
setting mode.
• Pour 1 litre of water into the salt container
and then fill with dishwasher salt
• Fill the rinse aid dispenser
If you want to use combi detergent
tablets such as: '3 in 1', '4 in 1', '5 in
1' etc. set the multitab function. (Re-
fer to 'Multitab function').
The softener should be adjusted according
to the hardness of the water in your area.
Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
Adjusting the water hardness setting
manually
2
2
2
2
2
2
1
electrolux 71
Use of
electronically
level 10
level 9
level 8
level 7
level 6
level 5
level 4
salt
yes
yes
yes
yes
yes
yes
yes