Cebora TIG Sound AC-DC 1531/m Bedienungsanleitung Seite 10

F
G
B
C
D
H
A
P
E
Q
R
O
AC
Mode key E.
When selected, one of the following LEDs lights:
F, G, H, L, M, N.
In TIG mode there will always be two LEDs lit: one indicating
HF or striking start mode, and the other indicating conti-
nuous or pulse mode with 2- or 4-stage command. The
selection changes each time the button is pressed.
The LEDs light alongside the various symbols to display your
choice:
F - LED. TIG welding with arc started
without high frequency.
10
N M L Z Y J
To light the arc, press the torch trigger and touch the tung-
sten electrode to the workpiece, then lift it. This move must
be quick and decisive (0.3 sec.).
L - LED. TIG welding with arc started with
high frequency.
To light the arc, press the torch trigger: a high voltage/fre-
quency pilot spark will light the arc.
G - LED. Continuous 2-stage TIG welding
(manual).
When the torch trigger is pressed, the current begins to
increase over the previously set "slope up" time, until it rea-
AA
AE
T
V
X
W
U
S
AB
AD
10