Display Elements; Status Displays Of The Transmitter - Siemens SIMATIC FS400 Anleitung

5

Display elements

5.1

Status displays of the transmitter

If the 7-segment transmitter display is lit, this indicates that the power supply is
connected.
a = 7-segment display
b = Test
Fig. 5.1-1: Transmitter status displays
Display of the current state of the transmitter:
7-segment
display
8.
S
1
2
.
F
x
Table 5.1-1:
Meaning
Hardware reset when turned on
Self test running (for approx. 1 s)
Normal operation, set to transmission channel 1
Normal operation, set to transmission channel 2
Dot next to the number: Transmitter display in test mode
F = Device fault
x = Fault number, alternating with "F"
Transmitter 7-segment display
137