Siemens SIMATIC FS400 Anleitung Seite 111

Safety Guidelines
This manual contains notices you have to observe in order to ensure your personal
safety, as well as to prevent damage to property. The notices referring to your personal
safety are highlighted in the manual by a safety alert symbol, notices referring only to
property damage have no safety alert symbol. These notices shown below are graded
according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not
taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not
taken.
CAUTION
with a safety alert symbol, indicates that minor personal injury can result if proper
precautions are not taken.
CAUTION
without a safety alert symbol, indicates that property damage can result if proper
precautions are not taken.
NOTICE
indicates that an unintended result or situation can occur if the corresponding
information is not taken into account.
If more than one degree of danger is present, the warning notice representing the
highest degree of danger will be used. A notice warning of injury to persons with a
safety alert symbol may also include a warning relating to property damage.
111