Residual Risks; Technical Data; Unpacking - Scheppach 7906100721 Originalbetriebsanleitung

•
Ensure good ventilation in the spraying ar-
ea and sufficient fresh air in the entire room.
Evaporating flammable solvents create an explo-
sive environment.
•
Do not spray or clean with materials whose
flash point is below 21°C. Use materials based
on water, low-volatility hydrocarbons or similar
materials. Volatile evaporating solvents create an
explosive environment.
•
Do not spray in the vicinity of ignition sources
such as static electricity sparks, naked flames,
pilot lights, hot objects, motors, cigarettes and
sparks from plugging in and unplugging power
cables or operating switches. Such spark sourc-
es can cause ignition of the surrounding area.
•
Do not spray materials that are not known to be
hazardous. Unknown materials can create hazard-
ous conditions.
•
Wear additional personal protective equipment
such as appropriate protective gloves and pro-
tective or respiratory mask when spraying or
handling chemicals. Wearing protective equip-
ment for appropriate conditions reduces exposure
to hazardous substances.
•
Do not spray on yourself, other people or an-
imals. Keep your hands and other body parts
away from the spray. If it penetrates the skin, seek
medical attention immediately. The spray can pene-
trate the skin even through a glove and be injected
into your body.
•
Do not treat an injection as a simple cut. A
high-pressure jet can inject toxins into the body
and cause serious injury. In case of skin injection,
seek medical attention immediately.
•
Be aware of any hazards of the material being
sprayed. Observe the markings on the container
or the manufacturer's information for the spray,
including instructions to use personal protec-
tive equipment. Follow the manufacturer's instruc-
tions to reduce the risk of fire and injuries caused
by toxins, carcinogens, etc.
•
Never spray without the nozzle head fitted. Us-
ing a special nozzle insert with the appropriate noz-
zle head reduces the likelihood of a high-pressure
jet penetrating the skin and injecting toxins into the
body.
18 | GB

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety infor-
mation" and the "Proper use" together with the oper-
ating manual as a whole are observed.
7.

Technical data

Required air quality
Air consumption
Working pressure
Nozzle size
Flow cup
Recommended spraying
distance
Technical changes reserved!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB, please
wear suitable hearing protection.
Information about noise level measured in accord-
ance with EN 1953
Noise data
Sound power level L
Sound pressure level L
Uncertainty K

8. Unpacking

• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately.
www.scheppach.com
cleaned, free of condensate
WA
pA
wa/pA
and oil
120 - 205 l/rpm
max. 3.5 bar
1.4 mm
0.6 l
15–25 cm
100.3 dB
90.8 dB
3 dB