VEVOR LD-BP1402 Bedienungsanleitung Seite 9

damage the wood.
4.Cleaning after pressing
• Please use water to clean the press, and use a brush to remove fruit
residues between the slats and the pressing plate. Dry with a towel.
• Lubricate the spindle with a small amount of edible oil or petroleum jelly.
• Never screw the pressure plate into the bottom of the pressure vessel.
• Store the press in a dry place, and turn the bottom plate of the press
above the height of the press container.
• WARNING: Disassemble and clean only when the press is fully idle and
cool. Do not clean while in operation.
• WARNING: Inspect the press before each use. Do not use if parts are
cracked, bent, broken, or worn. Replace damaged parts with
manufacturer-approved components only.
• WARNING: Regularly lubricate the spindle with food-grade oil to maintain
smooth operation and prevent rust.
• WARNING: Do not modify, alter, or repair the press yourself.
Unauthorized modifications may create hazards and void safety
compliance.
• WARNING: Do not use the press with damaged or missing parts.
• WARNING: Do not use near flammable materials, open flames, or heat
sources.
Collecting tray
1
with leg
cylindrical
2
basket
3 Supporting rod
4 Pressure plate
5 Triangle nut
1pc
1pc
2pcs
1pc
1pc
- 8 -