VEVOR LD-BP1402 Bedienungsanleitung Seite 8

• Fill the cylindrical basket to 25 mm below the edge.
• If you are using a squeeze bag, fold the corners of the bag over the fruit,
just like a small package.
• Put the T-shaped handle and spindle on top of the cylindrical basket,
insert the end of spindle into the triangle nut and tighten it.
• Tighten the wing nut to fix the pressure plate.
• Turn the handle to push the wooden or steel pressure plate into the
cylindrical basket.
• If the juice can no longer be fried, please loosen the pressure on the
pressure plate.
• To empty the press, lift the pressure plate, swing it from the path of the
cylindrical or woode gasket, and then lift the container from the collecting
tray with let, and then you can take out the juiced fruit.
• If there are few fruits, you can store the squeezed fruit and mix it with the
next squeezed fruit during the second squeezing process.
Please attention :
If you use our fruit crusher to grind fruit, you can use it with a juice press,
as shown in the picture:
Please do not tighten the pressure plate too tightly, and do not over-adjust
the handle to increase the pressure, as this may damage the press.
Please do not put the pressure plate on the crushed fruit, as this will
- 7 -