Herunterladen Inhalt Inhalt Diese Seite drucken

VEVOR LD-BP1402 Bedienungsanleitung Seite 6

Obstrebenpresse
Inhaltsverzeichnis
two types of products work completely differently. Take grapes as an
example: ordinary juicers can't handle them, because ordinary juicers
crush grape seeds and make the taste bitter. Only with a juice press, the
grape seeds will remain complete during the pressing process, and the
juice can finally be made into red wine. Apples, pears, and other similar
fruits must be crushed before they can be juiced. Whole, halved or diced
fruits cannot be pressed.
The crushed pulp is a necessary condition for the preparation of juices and
condiments. A suitable fruit crusher can be used to crush berries, grapes,
apples, pears and potatoes, and similar soft fruits/vegetables. Harder fruits,
such as sweet berries, carrots, or underripe harder pears are not suitable
for fruit crusher.
Apples, pears, quinces and similar fruits are very suitable for further
processing. Their relatively firm pulp can be crushed by a fruit crusher,
which in turn increases the juice yield for further processing. Similar fruits
such as grapes, raspberries, and gooseberries are not suitable for crushing.
Because their pulp is very soft and covered with peels, at the same time,
the seeds in the pulp release bitter substances during crushing, which in
turn dyes the juice color to dark brown.
High-quality juice must be pressed with healthy and ripe fruits. Immature,
well-ripe, rotten, damaged and moldy fruits must be discarded and cannot
be used for juice extraction. Freshly ripened fruits must show no signs of
decay before they can be used for suppression. Before pressing, please
wash the fruit carefully with drinking water to prevent dust from entering the
pulp.
This juice press is not suitable for industrial production.
1.Installation preparations for the juice press
• Use the included tools to install 3 legs of press stand to the top of the
table.
• Optional and take out the pressure plate counterclockwise.
• Loosen the wing nut at one end of the spindle, and swing the T spindle
and the triangle nut to one side.
- 5 -
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ld-bp0902

Inhaltsverzeichnis