VEVOR XC0152 Originalanleitung Seite 5

• ALWAYS follow the protocols for using a workshop airline or other
sources of compressed air.
• Automotive repair is an inherently dangerous activity. This manual and the
separate vehicle service manual cannot cover all possible situations that
may arise, and training, common sense, and care must be supplied by the
operator.
Operation Warning!
• Make sure your surroundings are safe. Avoid operating in crowded or
unstable areas to reduce the risk of accidents during operation.
• Use correct tools and personal protective equipment (PPE) before
performing any operation. Be extremely careful with possible pinching
points, moving parts, or parts that may suddenly spring out.
• Make sure the work area is clean and clear of any clutter or dirt that may
affect operations.
• For an abundance of safety, we recommend you take training before
using these tools. Serious injury could happen due to a lack of training.
1.Remove the intake hose/pipe off your turbo chargers inlet
3.Install the boost leak tester onto the turbo chargers inlet and secure with
5