VEVOR XC0152 Originalanleitung Seite 4

be necessary for your project.
• Dress properly. DO NOT wear loose clothing or jewelry while using this
product. Keep your hair, clothing, and gloves away from any moving parts.
• Keep your work area clean and well-lit. Cluttered or dark areas invite
accidents.
• DO NOT use tools if seals or threads are damaged. This may incur false
readings and personal injury.
• Maintain the tools in good, clean condition for optimum performance. Any
defective seals MUST be replaced before use to avoid incorrect readings.
• ALWAYS park your vehicle on firm and level ground and turn off its engine
before beginning work.
• ALWAYS ensure that your vehicle has been jacked up and is adequately
supported with axle stands.
• Ensure fuel supply is isolated to prevent fire whilst engine is being tested.
• Ensure that the correct adapter is used for the engine/vehicle being
tested.
• Always release the pressure from the gauge before disconnecting the
quick release coupling.
• Account for all tools and parts being used and DO NOT leave them in or
near the engine.
• Always refer to your vehicle's workshop manual, or a proprietary manual,
to establish the correct procedure and data.
• DO NOT overreach. Keep proper footing and balance at all times.
• Maintain this product. Check for misalignment or binding of parts,
breakage of parts, and any other condition that may affect this product's
operation. If damage is detected, have this product repaired before further
use.
• In case of an accident or injury, have a first aid kit and a communication
device (e.g., a phone) readily available. Know the location of emergency
medical facilities.
• ALWAYS wait till the engine and turbo have cooled to ambient
temperature BEFORE fitting the adapters, which are plastic and may melt
and get warped from engine and turbo heat.
4