Ferm CSM1038 Übersetzung Der Originalbetriebsanleitung Seite 14

EN
material to be sawn is damp.
4. Maintenance
Make sure that the machine is not live
when carrying out maintenance work on
the motor.
This machine has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper machine care and regular
cleaning.
Maintenance
Machines are designed to function without
problems for a long time with a minimum of
maintenance. Cleaning the saw regularly and
handling it properly will help extend its lifespan.
Cleaning
For safety reasons, the saw must be cleaned
regularly. A build-up of dust can affect the
operation of the saw.
• Remove the plug from the plug socket.
• Remove the protective cover and clean it
thoroughly using a soft brush, such as a paint
brush.
• Clean the housing regularly with a soft cloth,
preferably each time after use. Make sure that
the ventilation holes are free of dust and dirt.
Use a damp soft cloth to remove stubborn dirt.
Do not use any solvents such as petrol,
alcohol or ammonia, etc. These types of
substances damage the plastic parts.
Lubrication
The device does not need any additional
lubrication.
Defects
If a defect appears due to a part wearing out, please
contact the service center on the warranty card. At
the end of these instructions there is an exhaustive
overview of the parts that can be ordered.
Environment
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
14
Damaged and/or disposed of electrical or
electronic devices must be dropped off at
recycling stations intended for that
purpose.
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
Warranty
Read the warranty conditions on the separately
supplied warranty card.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
Ferm