Vibration And Noise Reduction; Behaviour In Emergency Situations; Residual Risks; Unpacking The Product - Parkside Pstd 350 B1 Bedienungsanleitung Und Originalbetriebsanleitung

11) Use suitable detectors to determine
if utility lines are hidden in the work
area or call the local utility company
for assistance. Contact ith electric
lines can lead to re and electric
shock. Damaging a gas line can lead
to explosion. Penetrating a water line
causes property damage or may cause
an electric shock.
WARNING!
m
Do not use any accessories that are
u
not recommended by PARKSIDE.
This can lead to electric shock and
re
˜ Vibration and noise reduction
To reduce the impact of noise and vibration
emission, limit the time of operation, use
low-vibration and low-noise operating
modes as well as wear personal protective
equipment.
Take the following points into account to
minimise the vibration and noise exposure
risks:
Only use the product as intended by its
design and these instructions.
Ensure that the product is in good
condition and well maintained.
Keep tight grip on the handles/grip
surface.
Maintain this product in accordance
with these instructions and keep it well
lubricated (where appropriate).
Plan your work schedule to spread any
high vibration tool use across a longer
period of time.
˜ Behaviour in emergency
situations
Familiarise yourself with the use of this
product by means of this instruction
manual. Memorise the safety warnings and
follow them to the letter. This will help to
prevent risks and hazards.
Always be alert when using this product,
so that you can recognise and handle
risks early. Fast intervention can prevent
serious injury and damage to property.
S itch the product o and re ove the
mains plug from the mains outlet if there
are malfunctions. Have the product
checked a uali ed pro essional
and repaired, if necessary, before you
operate it again.
˜ Residual risks
Even if you are operating this product in
accordance with all the safety requirements,
potential risks of injury and damage
remain. The following dangers can arise in
connection with the structure and design of
this product:
Health defects resulting from vibration
emission if the product is being used
over long periods of time or not
adequately managed and properly
maintained.
NOTE
This product produces an
u
electro agnetic eld during
operation This eld
circumstances interfere with active or
passive medical implants!
To reduce the risk of serious or fatal
u
injury, we recommend persons with
medical implants to consult their
doctor and the medical implant
manufacturer before operating this
product!
˜ B
˜ Unpacking the product
1. Take the product out of the packaging
and remove all packaging materials and
plastic wrappings.
2. Check to make sure that all listed parts
are included (see "Scope of delivery").
a under so e
GB/CY 11