Safety Instructions For Jigsaws - Parkside Pstd 350 B1 Bedienungsanleitung Und Originalbetriebsanleitung

measures reduce the risk of starting the
power tool accidentally.
4) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Po er tools are dan-
gerous in the hands of untrained users.
5) Maintain power tools and
accessories. Check for misalignment
or binding of moving parts, breakage
of parts and any other condition that
If damaged, have the power tool
repaired before use.
are caused by poorly maintained power
tools.
6) Keep cutting tools sharp and
clean. Properl
with sharp cutting edges are less likely
to bind and are easier to control.
7) Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use o
the po er tool or operations di erent
from those intended could result in a
hazardous situation.
8) Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slipper handles and grasping
surfaces do not allow for safe handling
and control of the tool in unexpected
situations.
Service
1) Have your power tool serviced by
identical replacement parts. This ill
ensure that the safety of the power tool
is maintained.
˜ Safety instructions for jigsaws
1) Hold the power tool by insulated
gripping surfaces, when performing
an operation where the cutting
10 GB/CY
an accidents
aintained cutting tools
accessory may contact hidden wiring
or its own cord. Cutting accessor
contacting a "live" wire may make
exposed metal parts of the power tool
"live" and could give the operator an
electric shock.
2) Use clamps or another practical way
to secure and support the workpiece
to a stable platform.
workpiece by hand or against your body
leaves it unstable and may lead to loss
of control.
. 3) Keep hands away from the sawing
area. Do not reach under the
workpiece. Contact ith the sa
can lead to injuries.
4) Only bring the power tool into contact
with the workpiece when switched
on. Other ise there is danger o
kickback if the cutting tool jams in the
workpiece.
5) Ensure that the footplate always rests
securely while sawing.
blade can break or lead to kickback.
6) W
the power tool and then pull the saw
blade out of the cut only after it has
come to a standstill. In this
you can avoid kickback and can place
down the power tool securely.
7) Always wait until the power tool has
come to a complete stop before
placing it down. The application tool
can jam and cause you to lose control
of the power tool.
8) Use only undamaged saw blades
that are in perfect condition. Bent or
dull saw blades can break, negatively
in uence the cut or lead to kick ack
9) Do not brake the saw blade to a
stop by applying side pressure after
damaged, break or cause kickback.
10) Only use the power tool with the
base plate. I
plate, you are at risk of not being able to
control the power tool.
olding the
ja ed sa
anner
. The sa lade can e
ou do not use the ase
lade