Initial Operation; Explosion Risk - SATA HRS Betriebsanleitung

7. Technical Data
Description
Average spraying pressure
Max. spraying pressure
Max. temperature of coating material
Air consumption at 44 psi
Nozzle size (diameter)
Air connection thread
Weight of HRS variant without material
flow control
Weight of HRS variant with material
flow control
Weight of HRS-E variant with material
flow control

8. Initial Operation

The pressure spray gun is delivered completely assembled and ready for
operation.
After unpacking check whether:
■ Damage to pressure spray gun
■ The scope of delivery is complete (see 5)
Danger!

Explosion risk!

An explosion may result if unsuitable air hoses are used.
→ Use only undamaged, solvent-resistant, anti-static air hoses in good
working condition that have a continuous compression strength of at
least 290 psi,, and an inside diameter of at least 0.4" as well as a
leakage resistance of < 1MOhm, such as the SATA air hose (Art. No.
53090).
Operating Instructions for SATA HRS
Variante mit
Kunststoff­
druckbecher
58 psi – 87
approx. 3.5
1/4'' male
35.6 oz.
Variante mit
Aluminium­
druckbecher
58 psi – 116
psi
87 psi
122 °F
approx. 3.5
cfm
1.5 mm
1/4" male
thread
32.5 oz.
– 33.2 oz.
– 45.9 oz.
US
psi
145 psi
176 °F
cfm
1.5 mm
thread
481