Rohde & Schwarz R&S FSQ Bedienhandbuch Seite 781

R&S FSQ
Unterschiede im GPIB-Verhalten zwischen der R&S FSP- und R&S FSE-Gerätefamilie
Gerät Befehl (Sheet 24 of 50)
FSE FETCh:BURSt:PERRor:RMS:AVERage?
FSE FETCh:BURSt:PERRor:RMS:MAXimum?
FSE FETCh:BURSt:PERRor:RMS:STATus?
FSE FETCh:BURSt:POWer[:IMMediate]?
FSE FETCh:MODulation[:ALL]?
FSE FETCh:PTEMplate:REFerence?
FSE FETCh:SPECtrum:MODulation:REFerence?
FSE FETCh:SPECtrum:SWITching:REFerence?
FSE FETCh:SPECtrum:SWITching[:ALL]?
FSE FETCh:SPURious:STEP?
FSE FETCh:SPURious[:ALL]?
FSE FORMat:DEXPort:APPend[:STATe] ON|OFF[,32]
R&S FSE FORMat:DEXPort:DSEParator
FSQ
FSE FORMat:DEXPort:HEADer[:STATe] ON|OFF[,32]
R&S FORMat[:DATA]
FSQ
FSE FORMat[:DATA]
R&S FSE HCOPy:ABORt
FSQ
R&S HCOPy:CMAP:DEFault
FSQ
R&S HCOPy:CMAP:HSL
FSQ
6.336
Fernsteuerung – Beschreibung der Befehle
Parameter Hinweise
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
ARFCn | TXBand | not available for
RXBand |COMBined | R&S FSQ and
DCSRx1800 R&S FSET
TXBand not available for
R&S FSQ and
R&S FSET
TXBand not available for
R&S FSQ and
R&S FSET
TXBand not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
not available for
R&S FSQ and
R&S FSET
TXBand OTXBand | not available for
RXBand | IDLeband R&S FSQ and
R&S FSET
not available for
R&S FSQ
POINt|COMMa
not available for
R&S FSQ
ASCii | REAL[,32]
ASCii | REAL | UINT UINT is not available for
[,32] R&S FSQ
new function for
R&S FSQ
<numeric value>, new function for
<numeric value>, R&S FSQ
<numeric value>
Operating Manual 1313.9681.11 - 02