Herunterladen Inhalt Inhalt Diese Seite drucken

Unit Description; Initial Use; Positioning The Device - Beurer TL 55 Day & Night Gebrauchsanweisung

Tageslichtlampe
Vorschau ausblenden Andere Handbücher für TL 55 Day & Night:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• Only use chargers specified in the instructions for use.
• Batteries must be charged correctly prior to use. The instructions from the manufacturer and the specifi-
cations in these instructions for use regarding correct charging must be observed at all times.
• Fully charge the battery prior to initial use (see Chapter "5. Initial use").
• Do not cover the device with covers, cushions, or similar during charging in order to prevent overheating.
• In order to achieve as long a battery service life as possible, fully charge the battery at least twice per year.

4. Unit description

Overview
1. Fluorescent screen
2. Rear of the device housing
3. Mains part connection
4. Stand
5. ON/OFF button
6. Brightness buttons +/-
7. Storage slot for stand
8. Holders for using the stand
7
6
Storage: push the long end of the stand, as shown in the left image, into the device.
Application: attach stand with the short end at a point marked with , as shown on the middle image, for example.
Display
9. Remaining usage time until automatic switch-off (e.g. 10 minutes)
10. Battery light
9

5. Initial use

Take the device out of the plastic wrapping. Check the device for damage or faults. If you notice any damage or
faults on the device, do not use it and contact Customer Services or your supplier.

Positioning the device

Place the device on an even surface. The position should be chosen to ensure a distance of around 10 cm to
50 cm between the user and the device.
Battery use / Charging the battery
In order to use the brightlight with the integrated battery, you must first of all charge it.
• To prevent possible damage to the brightlight, it must only be charged with the mains part included in
delivery. The mains part must only be connected to the mains voltage that is specified on the type plate.
• Insert the mains part into the mains part connection on the rear of the brightlight.
7
5
6
5
10
battery charging
battery needs charging
battery is completely charged
1
2
8
3
4
13
=
"CHG" green
=
"CHG" red
=
"CHG" off

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis