Unit Description; Initial Use - Beurer TL60 Gebrauchsanweisung

4

Unit description

Overview
1 Tubes, 2 x 36 W (inside)
2 Transparent cover
3 Mains cable
4 On/off switch
5 Fold-out stand
5

Initial use

Setup
Remove the unit from the packaging. Use
the fold-out stand to set it up on a level
surface. Select a location that leaves a dis-
tance of 20 to 50 cm between the unit and
the user. The lamp is most effective within
this range.
Mains connection
Connect the unit only to the mains voltage
listed on the type plate.
• Push the plug completely into the mains
socket.
Note:
• Ensure that there is a socket near the
place where the lamp will stand.
• Lay the mains cable in such a way
that no one can trip over it.
15