Herunterladen Inhalt Inhalt Diese Seite drucken

VOLTCRAFT V-CHARGE 80GPS Bedienungsanleitung Seite 78

Multifunktions-ladegerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Charge a NiMH or NiCd battery as follows:
• First, choose the rechargeable battery type with the button "ESC/MODE/STOP" or "DEC" as described in chapter
12. a) (NiMH or NiCd) and push the button "START/ENTER".
• Select the rechargeable battery programme "CHARGE Man" with the but-
ton "INC" or "DEC".
The value at the lower right represents the currently set charging current.
Use the button "INC" or "DEC" to select a different rechargeable battery programme; use the button
"ESC/MODE/STOP" to return to the main menu.
• If the value for the charging current must be changed, push the "START/ENTER" button. The charging current
flashes. Change the charging current using the button "INC" or "DEC". Keep the respective button pressed for
quick adjustment.
The maximum possible charging current depends on the rechargeable battery type and number of cells. The
maximum charging power is 80 W.
Confirm the set charging current with the "START/ENTER" button.
• When no display is flashing anymore, start charging by keeping the "START/ENTER" button pushed (approx.
3 seconds).
• The charger now examines the connected rechargeable battery. In case
of an error, a warning signal is output and the corresponding information is
displayed. You can stop the warning signal by pressing the "ESC/MODE/
STOP" button. You then return to the previous configuration menu.
If no error is found, e.g. the display shown on the right will appear.
The rechargeable battery type is shown in the upper left ("NiMH" = NiMH
rechargeable battery), the upper middle shows the charging current and
the upper right the current rechargeable battery voltage.
The lower left shows the current rechargeable battery programme, in the middle the elapsed charging time and
the charged capacity in mAh are displayed to the right of this.
• After completion of charging, an audio signal is emitted (if it has not been turned off).
If you wish to cancel the charging process, push the "ESC/MODE/STOP" button.
78
NiMH CHARGE
CURRENT
BATTERY CHECK
WAIT...
NiMH 1.2A
7.63V
CHG 022:43 00682
Man
0.1A

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis