Create Wind Forma Bedienungsanleitung Seite 13

MOUN TI NG T HE CA NO PY
1
1. Lift the canopy up to the mounting bracket and align the loosened screws on the mounting
bracket with the holes in the rosette.
2. Turn the canopy to adjust it and reinsert the screws.
3. Secure the screws using a screwdriver.
4. Then lift the decorative cover towards the canopy so that it is fixed with the built-in mag-
net.
Advice: Another person should help him hold the stepladder and hand him the fan once he
has climbed the ladder.
B L ADE AS SE MB LY
Align the holes in the blade support with the holes in the blades and the motor body and
screw them into place, but do not tighten the screws until they are all in place and screwed
in.
DEC OR AT IV E LID AS SE MB LY
Once the blades are correctly positioned, attach the decorative cover by screwing it onto
the motor.
2 3 4
E NGLI SH
5
13