Using The Thermostat; Maintenance And Cleaning; Cleaning The Housing - Ruby Fires AJ55 Bedienungs- Und Sicherheitshinweise

Using the thermostat

Note: Your electric fireplace insert is equipped with a thermostat. You can therefore consistently
maintain a preset room temperature by means of automatic on and off switching.
• Turn the thermostat control 10 in the direction of rotation or until you hear a clicking sound.
Note: The clicking sound signalises the current room temperature.
• Set the switch for the first heating stage 8 to position I if you would like a low supply of heat. Set the
switches for the first 8 and second heating stages 7 to positions I and II if you would like a high
supply of heat.
• Now turn the thermostat control 10 in the direction of rotation until you reach the desired room
temperature.
• Now the heating function begins automatically.
ATTENTION! DANGER OF BURNING! Please observe that the surfaces which radiate heat can
achieve temperatures exceeding 50 °C. Make sure that the unit is switched off and cooled off before
you touch it.
ATTENTION! Please make sure that the unit is not covered with towels, curtains or similar objects.
Otherwise there is danger of overheating. Therefore, always pay attention that the ventilation slots 1
are kept clear.
• As soon as the set room temperature is reached, the heating function of your electric fireplace insert
switches off automatically.
• As soon as the set room temperature falls short, the heating function of your electric fireplace insert
switches on automatically.
• Switch off the electric fireplace insert when it is no longer needed (see "Switching heating function
on / off").

Maintenance and cleaning

WARNING! DANGER TO LIFE BY ELECTRIC SHOCK! Before conducting cleaning or maintenance
work please pull the power plug 4 out of the outlet and let the unit completely cool off.
ATTENTION! DANGER OF BURNING! It is imperative to let the unit completely cool off before any
work is done on it.
ATTENTION! Only let an electrical technician conduct repairs.

Cleaning the housing

• In no case should aggressive or corrosive cleaning agents be used. Otherwise damage to the
product could result.
• Clean the housing with a slightly dampened cloth.
• Clean the ventilation slots regularly and thoroughly 1 (e.g. with a vacuum cleaner) so that no dust
can accumulate.
• Clean the glass plate 5 with a damp cloth and if necessary with a glass cleaner.
10