Operation; Description Of The Appliance - clage DSX Touch Kurzanleitung

Note: Carefully read the enclosed safety instructions through in full before the appliance
is installed, put into service and used and follow them in the further steps and during use!

1. Description of the appliance

Operation

The E­convenience instant water heater DSX Touch is a fully electronically controlled
instantaneous water heater with touch display and remote control for a convenient
and efficient water supply to one or more tap connections.
Its electronic control regulates the power consumption depending on the selected
outlet temperature, the respective inlet temperature and the flow rate, thus reaching
the set temperature exactly to the degree and keeping it constant in case of pressure
fluctuations. The required outlet temperature can be entered on the touch­sensitive
display within a range between 20 °C and 60 °C and can be read off that digital display.
Alternatively, the appliance can be conveniently controlled via the Bluetooth
control or via the CLAGE app with a smartphone or tablet.
The DSX Touch has an intuitive menu guide where different user profiles can be set up
and where collected data can be read out
The inlet temperature can be up to 70 °C so that operation in connection with reheat­
ing, e.g. in solar systems, is possible.
It is possible to use the instantaneous water heater in combination with an external
load shedding relay for electronically controlled instantaneous water heaters (refer to
installing instructions).
As soon as you open the hot water tap, the instantaneous water heater switches on
auto ma ti cally. When the tap is closed, the appliance automatically switches off. The
water heater is operated at the device itself, with the wireless remote control or via
the CLAGE app with a smartphone or tablet.
19
CLAGE
EN
remote
®