Safety Instructions For Installing, Commissioning And Maintenance; Guarantee Conditions - Elmo Rietschle V-Vgd 11 Originalbetriebsanleitung

2.8

Safety instructions for installing, commissioning and maintenance

• The operator will ensure that any installation, commissioning and maintenance work is carried out by au-
thorised, qualified specialists who have gained sufficient information by an in-depth study of the operat-
ing instructions.
• Only work on the machine when it is idle and cannot be switched on again
• Ensure that you follow the procedure for decommissioning the machine described in the operating in-
structions.
• Fit or start up safety and protective devices again immediately after finishing work.
• Conversion work or modifications to the machine are only permissible with the manufacturer's consent.
• Only use original parts or parts approved by the manufacturer. The use of other parts may invalidate li-
ability for any consequences arising.
• Keep unauthorised people away from the machine
2.9

Guarantee conditions

The manufacturer's guarantee or warranty will no longer apply in the following cases:
• Improper use
• Not complying with these instructions
• Operation by insufficiently qualified staff
• Using spare parts that have not been approved by Gardner Denver Schopfheim GmbH
• Unauthorised modifications to the machine or the accessories supplied by Gardner Denver Schopfheim
GmbH
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
Tel. 071 918 60 60, Mail: v-g@prematic.ch
Safety
9
|