Elmo Rietschle V-VGD 11 Originalbetriebsanleitung Seite 46

Verfügbare Sprachen

Installation

5.1

Preparing for installation

Check the following points:

• Machine freely accessible from all sides

• Do not close ventilation grids and holes

• Sufficient room for installing and removing pipes and for maintenance work, particularly for installing and

dismantling the machine

• No external vibration effects

• Do not suck any hot exhaust air from other machines into the cooling system.

5.2

Installation

Property damage caused by improper installation!

Improper erection and installation can damage the machine.

Ø The machine may only be operated when it is set up horizontally.

(Max. inclination: 10 ° in all directions)

Ø The machine must be screwed to the bearing surface to secure it against tipping and

slipping.

Ø The bearing surface must be plane and even.

Ø The bearing surface must be designed to be able to carry the weight of the machine.

Ø The bearing surface must be at least the same size as the machine.

An output reduction is noticeable when installed at more than 1000 m above sea level. In this

case, please contact us.

It is possible to install the machine on a firm base without anchoring. When installing on a sub-

structure we recommend fixing with flexible buffers.

Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch

NOTICE

Tel. 071 918 60 60, Mail: v-g@prematic.ch

V-vgd 16 V-vgd 21