Herunterladen Diese Seite drucken

ELL Solid RG10A/BGEF Bedienungsanleitung Seite 4

Verfügbare Sprachen

Verfügbare Sprachen

Operating Temperature
When your air conditioner is used outside of the following temperature ranges, cer tain safety
protection features may activate and cause the unit to disable.
Inverter Split Type
COOL Mode
Room
16°C~32°C(60°F~90°F)
Temp.
-15°C~50°C(5°F~122°F)
Outdoor
Temp.
For models with low temp.
cooling systems.
FOR OUTDOOR UNITS WITH AUXILIARY ELECTRIC HEATER
When outside temperature is below 0°C (32°F ), we strongly recommend keeping the unit plugged in at all time to ensure
smooth ongoing performance.
To further optimize the performance of your unit, do the following:
Keep doors and windows closed.
Limit energy usage by using TIMER ON and TIMER OFF functions.
Do not block air inlets or outlets.
Regularly inspect and clean air filters.
Features
Default Setting
When the air conditioner restarts after a power
failure, it will default to the factory settings (AUTO
mode, AUTO fan, 24°C (76°F). This may cause
inconsistencies on the remote control and unit panel.
Use your remote control to update the status.
Auto-Restart
In case of power failure, the system will immediately
stop. When power returns, the Operation light on
the indoor unit will flash. To restart the unit, press the
ON/OFF button on the remote control. If the system
has an auto restart function, the unit will restart using
the same settings.
When the outdoor temperature is below zero, the
electric heating belt of the outdoor unit chassis is
used for ice melting, without
defrosting.
HEAT Mode
0°C~30°C(32°F~86°F)
-25°C~24°C(5°F~75°F)
Louver Angle Memory Function
This product are designed with a louver angle
function. When the unit restarts after a power failure, the
angle of the horizontal louvers will automatically return to
the previous position. The angle of the horizontal louver
should not be set too small as condensation may form and
drip into the machine. To reset the louver, press the manual
button, which will reset the horizontal louver settings.
3
DRY MODE
10°C~32°C(50°F~90°F)
0°C~50°C(32°F~122°F)
memory
loading

Verwandte Produkte für ELL Solid RG10A/BGEF

Diese Anleitung auch für:

Solid rg10ab2s/bgef