ELL Solid RG10A/BGEF Bedienungsanleitung Seite 33

2 Install drain joint (Heat pump unit only)
Step 1:
Find out the base pan hole of outdoor unit.
Step 2:
Fit the rubber seal on the end of the drain joint that will connect to the outdoor unit.
●
Insert the drain joint into the hole in the base pan of the unit. The drain joint will click in
●
place.
Connect a drain hose extension to the drain joint to redirect water from the unit during
●
heating mode.
IN COLD CLIMATES
In cold climates, make sure that the drain hose is as vertical as possible to ensure swift water drainage.
If water drains too slowly, it can freeze in the hose and flood the unit.
Seal
32
Base pan hole of
outdoor unit