ELL Solid RG10A/BGEF Bedienungsanleitung Seite 14

SET function
SET
Press the SET button to enter the function setting, then press SET button or TEMP
button to select the desired function. The selected symbol will flash on the display area, press the OK button to
cconfirm.
To cancel the selected function, just perform the same procedures as above.
Press the SET button to scroll through operation functions as follows:
Breeze Away ( ) Fresh (
Breeze Away function :
This feature avoids direct air flow blowing on
the body and makes you feel indulging in silky
coolness.
NOTE: This feature is available under cool, Fan
and Dry mode only.
Fresh
When the Fresh function is initiated, the ion
generator is energized and will help to purify the
air inside.
Sleep function
The SLEEP function is used to decrease
energy use while you sleep(and don't need
the same temperature settings to stay
comfortable).
NOTE: The SLEEP function is not available in
FAN and DRY mode.
AP function : (WIFI)
Choose AP mode to do wireless network
configuration. For some units, it doesn't work by
pressing the SET button. To enter the AP mode,
continuously press the LED button seven times in
10 seconds.
SET
or
) Sleep( ) Follow Me ( ) AP mode (
Follow me function
The FOLLOW ME function enables the remote control
to measure the temperature at its current location and
send this signal to the air conditioner every 3 minutes
interval.
When using AUTO, COOL or HEAT modes, measuring
ambient temperature from the remote control(instead of
from the indoor unit itself) will enable the air conditioner
to optimize the temperature around you and ensure
maximum comfort.
NOTE: Press and
seven seconds to start/stop memory feature of
Follow Me function.
If the memory feature is activated, " ON "
displays for 3 seconds on the screen.
If the memory feature is stopped, " OF "
displays for 3 seconds on the screen.
While the memory feature is activated,
press the ON/OFF button, shift the mode
or power failure will not cancel the Follow
me function.
13
OK
OK
or TEMP
) (WIFI)
hold Boost button for