Program Menu; Digital Menu - Behringer Wave Schnellstartanleitung

MENU SHORTCUTS
Firmware 1.0.11 April 2025

Program Menu

PROG: program number 00 – 99
BANK: bank number 0 or 1
WAVE: wavetable from 00 to 127
MIDI: MIDI channel from 00 (MIDI off) to 16
DTF: Data Transfer Function
0 – Program
1 – Edit buffer A to A, B to B
2 – Edit buffer A to A
3 – Edit buffer B to B
4 – Edit buffer A to B
5 – Edit buffer B to A
6 – Edit buffer A to A and B
7 – Edit buffer B to A and B
8 – Initialize (does not erase user wavetables
or transients)
9 – Store
SPLT: keyboard split point
KEYB: keyboard mode
0 – Poly (8 voice polyphonic)
1 – Quad (4 voice polyphonic)
2 – Duo (2 voice duophonic)
3 – Mono (Unison)
4 – Quad A/B
5 – A mono, B quad
6 – A mono, B poly
7 – A poly, B mono
8 – A mono, B mono
9 – A poly, B mono CV in
TUNE: A 400 – A499
SYSEX: Used for manual dump of program data.
0 – default (no action).
1 – sends current edit buffer data.
2 – sends current program data.
3 – sends current bank.
4 – sends sequencer edit buffer.
5 – sends current program's sequencer data.
6 – sends current bank's sequencer data.
LOC: Local control 0 to disable, 1 to enable
User Menu
PROG: Program number 00 to 99
EXP-PED: Expression pedal action
0 – disabled
1 – loudness
2 – filter frequency
3 – filter emphasis
4 – wave
5 – modulation
TOUCH: Channel aftertouch
0 – disabled
1 – enabled and transmitted
2 – enabled for receive only
3 – enabled for transmission and receipt
BRT: LCD display brightness 00 – 99
CNT: LCD display contrast 00 – 99
V: Firmware version
PAR-COM: MIDI CC parameters
0 – disabled
1 – transmission only
2 – receive only
3 – transmitted and received
FIRM: Firmware emulation
0 – original
1 – enhanced with linear envelopes
2 – enhanced with exponential envelopes
OSC: Oscillator quality
0 – original
1 – enhanced
LFO: LFO precision
0 – original
1 – improved precision
Sequencer Menu
PR: program number 00 – 99
MOD: Sequencer mode. First digit
0 – sequencer active
1 – arpeggiator one active
2 – arpeggiator two active
Second digit
0 – only used when sequencer is active
1 – arpeggio up
2 – arpeggio down
3 – arpeggio up and down
4 – arpeggio random
5 – arpeggio moving
Quick Start Guide
CLK: Clock source and rate. First digit
0 – internal clock
1 – DIN MIDI
2 – USB MIDI
3 – Analog trigger
Second digit (internal and analog only)
0 – 1 pulse per step
1 – 2 ppqn
2 – 24 ppqn
3 – 48 ppqn
GAT: Gate duration from 1 to 99
DIV: Clock division
1/4
0 – note
1/8
1 – note
1/16
2 – note
1/32
3 – note
1/4
4 – note triplet
1/18
5 – note triplet
1/16
6 – note triplet
BPM: Internal clock speed from 40 to 240 bpm
MTN – Metronome
0 – disabled
1 – enabled
OVP: First digit – overdub
0 – disabled
1 – enabled
Second digit – transposition of sequence
0 – enabled
1 – keyboard independent of sequencer
SAVE: Saves the sequence to current program
STEP: Indicates current sequence step and total
steps programmed
STATUS: Indicates whether sequencer is stopped,
playing, recording, appending or arpeggiating.

Digital Menu

PROG: program number 00 – 99
GROUP: Group A or Group B
UW: Upper Wavetable
When a wavetable is in use:
0 – use selected wavetable and enable
wavetable wrapping
1 – use most interesting waves from
wavetables 1 – 30
2 – use selected wavetable with no wrapping
19