Care And Maintenance; Warranty - Collomix Xo 33 duo Originalbetriebsanleitung

Care and maintenance

►Before you carry out any operations on the
machine, and especially when changing the
mixing tool, always pull out the power plug out
first.
Clean the machine and the mixing tool immediately
after use. We recommend that you use the Collomix
MIXER CLEAN cleaning bucket for cleaning.
Keep the HEXAFIX coupling
clean and freely moving at all
Fett
times.
Grease
Take the mixing tool out of the
Graisse
coupling after you have finished
Smar
your work.
Grease the hexagon mount
of the coupling at regular
intervals with suitable grease.
Keep the ventilation slits clean and clear at
all times so that the machine can be properly
cooled. Blocked ventilation slits will lead to
irreparable damage to the machine.
Make sure that the ON/OFF switch moves and
releases smoothly at all times.
The machine is equipped with self-deactivating
carbon brushes. This means that the machine will
shut itself down once a certain level of wear is
reached. The carbon brushes can be replaced by
the authorized customer service center or by the
Collomix Service center.
Have repairs carried out only by an approved
workshop or by your Collomix Service.
Only use original Collomix
replacement parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
http://www.collomix.com
Disposal
The device, accessories and packaging should all
be consigned for environment-friendly recycling.
Electrical tools which have come to the end of their
service lives must be made unusable by removing
the mains power cable.
For EU countries only:
Do not dispose of electrical tools with
household waste.
In accordance with EU Directive 2002/96/
EC concerned with used electrical and electronic
equipment and the incorporation of the requirements
of the directive in national legislation, unusable
electrical equipment must be collected separately
and consigned for environment-friendly recycling.
Xo 33 duo_BA 24spr_Rev1.indd 11

Warranty

The manufacturer provides a warranty within the
framework of his terms and conditions of delivery
in accordance with the requirements of statutory/
country-specific provisions. Should you need to
make a claim under the warranty, please provide us
with your invoice or delivery note.
On no account will any warranty claims be accepted
if any repairs are carried out by third parties. In the
event of any irregularities, please send the machine
to us. Complaints can only be accepted if the
device is sent to the Collomix Service center
undismantled.
The warranty does not apply to damages caused
by normal wear, overloading, improper handling,
unsuitable accessories or inadequate maintenance.
Any structural or functional modifications to the
machine which are made without our agreement
shall render the warranty and the Declaration of
Conformity null and void.
Subject to change.
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
accessories and
Germany
EN
24.11.2014 13:30:12