Before Using For The First Time; Care, Maintenance And Disposal - Collomix UNIMIX U 900 Originalbetriebsanleitung

Before using for the first time

Screw the mixer tool with the M 14 external thread into the mixer spindle (24 mm and 17 mm open end
wrench, if necessary). Be careful by using a different paddle dimension or shape as recommended a dam-
age to the machine may cause.
Connect the machine cable into the supply outlet, making sure that the power supply is 220/230-240 volt.
Start - up
By pressing in the release button, you release the switch lock.
Pressing the ON/OFF-switch with your finger starts the machine.
When the switch is released, the machine switches off.
Always hold the unit by the handles with both hands.

Care, maintenance and disposal

Keep the machine and mixer tool clean.
The machine's internal components must be kept free of foreign bodies. When using the
machine always check, that the ventilation slots are not covered.
Special maintenance of the machine is not required, however wear parts (f.i. carbon brushes)
should be checked occassionally. Maintenance or repairs must be carried out only by authorized
repair shops.
Use original spare parts only
The machine, accessories and packaging should be properly recycled and never disposed of
with household waste. All devices which are no longer suitable for use can be taken for recycling
to the nearest depot for electrical scrap or returned to the manufacturer delivery free.
Warranty
The manufacturer's guarantee, is valid for 24 months from the date of purchase. Should claims be made
under guarantee, please enclose the invoice or delivery note.
Repairs carried out by a third party release U from any obligation with respect to the guarantee. In the
event of malfunctions, please return the machine to us.
Damage deriving from normal wear and tear, overloading or improper use of the machine, is not covered
by the guarantee.
U900_14Sprachen_Rev2 2021.indd 10 U900_14Sprachen_Rev2 2021.indd 10
Subject to changes
08.06.2021 10:32:11 08.06.2021 10:32:11