Spare Parts; Dismantling; Disposal - Maico ECA 150 ipro Montage- Und Betriebsanleitung

13. Spare parts

Spare parts may only be sourced
from and fitted by a specialist
installer.
Item Designation
1.1
Standard circuit
board
1.2
Standard K circuit
board
1.3 VZC circuit board
and sensors
1.4 RC circuit board
5.1 Electronics cover
5.2 Electronics cover,
perforated for
sensor variants
6.2 Shutter frame,
assembled
7 Cover, complete
7.1
Cover, complete
for B variants
7.2
Cover, complete
for H variants
9.1 B module
9.2 H module
In case of questions
Maico Elektroapparate-Fabrik GmbH
Steinbeisstrasse 20
78056 Villingen-Schwenningen
Germany
Tel. +49 (0)7720 694 445
Fax +49 (0)7720 694 175
E-mail: ersatzteilservice@maico.de
Article no.
E101.1410.0000
E101.1413.0000
E101.1411.0000
E101.1412.0000
0059.1510.0000
0059.1510.9000
E059.1503.9100
0059.1502.9000
0059.1502.9100
0059.1502.9200
0157.0145.0000
0157.0146.0000
13. Fault rectification │ uk

14. Dismantling

Dismantling may only be undertaken
by a trained electrician ( Chapter 1).
Danger to life from electric
shock.
Prior to access to the connection
DANGER
terminals switch off all supply
circuits. Switch off mains fuse,
secure against being accidentally
switched back on and position a
visible warning sign.
For K units only: Danger of
burning due to contact with
thermo-bimetal strip [6.3].
CAUTION
Do not touch bimetal strip [6.3].
Bimetal strip is very hot after fan
is switched off.
10 minutes to cool down
1. Switch the mains fuse off.
2. Remove covers [7]/[8].
3. Remove the electronics cover [5].
4. Remove power cable.
5. Remove fan.

15. Disposal

Do not dispose of in domestic
waste. The unit contains in part
materials that can be recycled and in
part substances that should not end
up in the domestic waste.
Dispose of the unit once it has reached the
end of its service life according to the
regulations valid where you are.
It may take up to
.
31