Maintenance; Cleaning; Fault Rectification; Spare Parts - Maico ECO 30 E Montage- Und Betriebsanleitung

UK │ 11. Mounting
2. Switch on mains fuse, remove warning
sign.
3. Run function test. The fan must oscillate in
the swivelling range (swivel back and
forth).

13. Maintenance

The unit is maintenance-free.

14. Cleaning

The fan must be cleaned regularly,
especially after longer downtimes.
NOTICE:
Unit damage in the case of incorrect
cleaning. Do not use aggressive cleaning
agents.
 Only clean the unit with a soft cloth  Do
not remove protective cage.
1. Switch off mains fuse, secure against
being accidentally switched back on and
position a visible warning sign. Comply
with the 5 safety regulations.
2. Clean the bearing bracket and fan unit
with a dry cloth.
3. In the case of a heavily soiled protective
cage, clean the cage with a damp cloth.
4. Switch on mains fuse, remove warning
sign.

15. Fault rectification

Fault finding and repairs should
only be carried out by trained
specialists.
Fault Cause, measure
Fan does No mains voltage.
not switch on. Check whether the mains fuse
has failed. Switch on if
necessary.
16
Motor's Motor too hot. The motor
thermal protection switch has switched
overload off the fan. Wait until the motor
has cooled off. The cool-down
protection has
switched the time can take up to 10 mi-
fan off. nutes. NOTICE: The unit
switches back on automati-
cally after cooling down.
Impeller blocked. Check
Fan does not
impeller and clean if
switch on.
necessary.
Deposits on Imbalance if the impeller is
the impeller soiled or running irregularly.
caused by Clean unit with a damp cloth.
dust in the air.
Impeller not Switch off unit. Ensure that the
turning.
impeller is not blocked by
foreign bodies.
If faults reoccur, send the unit to our
factory for repairs.

16. Spare parts

Spare parts
Article no.
ECO 30 E
Impeller 0060.0042.0001
Protective On request
cage,
complete
Protective 0150.0015.0001
cage – upper
part
0150.0014.0000 0150.0017.0000
Protective
cage – lower
part
Fan motor 0089.0109.0002
Drive motor 0156.0023.0000
Bearings 0190.0028.0000
(bearing
bushing)
Article no.
ECO 40 D
0060.0044.0001
E150.0018.0001
0150.0018.0001
0089.0110.0001
0156.0023.0000
0190.0028.0000