Attaching/Removing An Insertion Tool; Checking The Charging Level Of The Battery Pack; Charging The Battery Pack - Parkside Performance Pdssap 20-Li D3 Bedienungsanleitung

˜ Attaching/removing an
insertion tool
NOTE
The directional information in this
u
section should be interpreted as
meaning that the user is positioned
behind the product .
Impact-resistant accessory or socket
u
adapter must be used, a non-impact
rated accessory may cause a
reduction in the fastening torque or
damaged accessories .
Attaching an insertion tool
(Fig. D)
1 . Insert a bit holder
adapter into the tool holder
18 ] [
2 . Push a screw bit or socket onto the bit
holder or socket adapter
[ 17 ]
3 . Check that the insertion tool is firmly
secured by pulling on it .
Removing an insertion tool
(Fig. D)
CAUTION! Risk of burns!
m
Insertion tools can become very hot .
u
Wear protective gloves whenever
appropriate .
1 . Unlocking the tool holder
locking sleeve
2 ] [
2 . Remove the insertion tool .
˜ Checking the charging level
of the battery pack
Press next to the charging level
[ 8 ]
o
indicator on the battery pack
9 ] [
The charging level of the battery
pack is indicated by illumination of
[ 6 ]
the corresponding LED lights on the
charging level indicator
16 GB
or socket
[ 17 ]
.
1 ] [
.
18 ] [
: Slide the
1 ] [
forwards .
.
6 ] [
.
[ 9 ]
Indicator Colour
Red, orange,
green
Red, orange
Red
Charge the battery pack
o
only the red LED on the charging level
indicator is illuminated .
[ 9 ]
˜ Charging the battery pack
NOTICE! Risk of damage to the
m
battery pack
6 ] [
Do not expose the battery pack
u
to direct sunlight for long periods
and do not place it on a radiator .
Observe an ambient temperature of
max. +50 °C.
NOTE
You can find detailed instructions in
u
the user manual of the charger
If the battery pack
u
allow it to cool down before
charging .
1 . Remove the battery pack
product .
2 . Push the battery pack
charging slot of the charger
3 . Connect the charger
outlet .
4 . After charging: Disconnect the
charger from the socket-outlet .
[ 15 ]
5 . Pull the battery pack
charger .
[ 15 ]
Meaning
Fully
charged
Partially
charged
Needs to be
charged
when
6 ] [
!
[ 6 ]
.
[ 15 ]
is still warm,
6 ] [
from the
[ 6 ]
into the
6 ] [
.
15 ] [
to a socket-
15 ] [
out of the
6 ] [