Attaching And Removing The Attachment Tool; Checking The Battery Charge Level; Charging The Battery - Parkside Performance Passp 20-Li B4 Originalbetriebsanleitung

3 ≙ highest speed level
• Display (level) (13)
Display of the set speed level
1 ≙ no-load rotation speed: 0–660
−1
min /impact rate: 0-500 min
torque: 130 Nm
2 ≙ no-load rotation speed: 0-1250
−1
min /impact rate: 0-1500 min
torque: 400 Nm
3 ≙ no-load rotation speed: 0-1550
−1
min /impact rate: 0-1900 min
torque: 1356 Nm
1 2 3 ≙ speed/impact/torque rate
is set in the PARKSIDE App (Expert
Mode).
• Direction of rotation switch (2)
NOTICE! Only operate the direction
of rotation switch when the tool has
stopped!
The arrow on the direction switch (2) in-
dicates the working direction.
• Screw in screw/nut
• Centre Switch lock
• Unscrew screw/nut
• On/Off switch (14)
• After inserting the battery: Connect-
ing to the PARKSIDE app
• Switching on: Press
• Infinitely variable speed regula-
tion: The more you press the on/off
switch, the higher the speed.
• Switching off: Release
• "Connected" indicator (4)
Status of the connection with the
PARKSIDE app
flashing connection attempt
continuous light connection estab-
lished
Attaching and removing the
attachment tool
Notes
• Tool holder: ½" (12,7 mm) Square
−1
/
• Attachment tool: Socket/Socket ad-
apter (½"→ ¾")
Procedure
−1
/
1. Slide the desired socket (16) onto the
tool holder (1).
2. Only for use with the socket adapter:
−1
/
Slide the socket adapter (15) onto the
tool holder (1) to use a ¾" attachment
tool.
CAUTION! Risk of burn injury! At-
3.
tachment tools can become very hot.
Wear protective gloves whenever ap-
propriate.
Pull the attachment tool off the tool
holder (1).
Checking the battery charge
level
LEDs
red, orange, green Battery charged
red, orange
red
1. Press the button (8) next to the charge
level indicator button (9) on the battery
(7).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
2. Charge the battery (7) when only the
red LED on the charge level indicator
(9) is illuminated.

Charging the battery

See also the charger instruction manual.
GB MT
Meaning
Battery partially
charged
Battery needs to be
charged
29