Parkside Performance PDSSAP 20-Li D3 Bedienungsanleitung Seite 11

The A-rated noise level of the product is
typically as follows:
Sound pressure level L
Uncertainty K :
pA
Sound power level L
Uncertainty K :
WA
Total vibration value
Total vibration values (triaxial vector sum)
determined in accordance with EN 62841:
Vibration a :
h
Uncertainty K:
WARNING!
m
Wear hearing protection!
WARNING!
m
The vibration and noise emissions
u
during actual use of the product
can differ from the declared values
depending on the manner in which
the tool is used, especially what kind
of workpiece is processed .
Try to minimise exposure to vibration
and noise . Examples of measures
to reduce vibration include wearing
gloves when using the tool and
limiting working time . All parts of
the operating cycle must be taken
into account (e . g . times when the
product is switched off and when
it is running idle in addition to the
trigger time).
10 GB
: 71 .2 dB
pA
3 .0 dB
: 79 .2 dB
WA
3 .0 dB
8 .02 m/s
2
1 .5 m/s
2
NOTE
The declared vibration total value and
u
the declared noise emission value
have been measured in accordance
with a standard test method and may
be used for comparing one tool with
another .
The declared total vibration value and
u
the declared noise emission value
may also be used for a preliminary
assessment of exposure .
Charging time
WARNING! Risk of injury and
m
property damage due to improper
handling of the battery pack!
Observe the safety instructions and
u
notes on charging and proper use as
shown in the user manual for your
battery pack and charger from the
X 20 V TEAM series .
You can find a detailed description
u
of the charging process and further
information in the separate user
manual .
The product is part of the
X 20 V TEAM series and can be
operated with battery packs of the
X 20 V TEAM series . Battery packs
of the X 20 V TEAM series may only
be charged using chargers of the
X 20 V TEAM series .
The charging time is influenced by
factors such as the temperature of
the environment and the battery pack,
as well as the mains voltage applied,
and may therefore deviate from the
specified values.
We recommend that you operate this
product with the following battery
packs only:
PAP 20 B1
–
PAP 20 B3
–