Before first use
Accessories
NOTE
This instruction manual contains
u
information and suggestions for
several accessory tools and their
uses. The accessory tools depicted
are not included in the shipment (see
"Scope of delivery"), but are meant
to indicate additional possibilities for
using this product.
WARNING!
m
Do not use accessories not
u
recommended by Parkside. This may
result in electric shock or fire.
To operate this product safely and
correctly, the following accessories, i.e.
tools and accessory tools, are necessary:
Suitable drill bits
Suitable driver bits
Cross tip screwdriver
Cooling lubricant (cutting oil) suitable
for drilling in metal
Suitable personal protective equipment
Accessories and accessory tools are
available through your authorised dealer.
When buying always consider the
technical requirements of this product (see
"Technical data").
If you are not certain, ask a qualified
specialist and get advice from your trusted
dealer.
Suitable battery packs and chargers
Battery pack:
X 20 V Team
Charger:
X 20 V Team
14 GB
Attaching/removing the
battery pack
CAUTION! Risk of injury!
m
Always lock the on/off switch
u
avoid accidental starting by moving
the rotation direction switch
the centre position (Lock) before
attaching/removing the battery
pack
.
[
]
Removing the battery pack: Press
o
the battery pack release button
Remove the battery pack
Attaching the battery pack: Align the
o
battery pack
[
]
it into it. Ensure it clicks noticeably in
place.
The battery pack can only be inserted
into the product in one direction.
Checking the battery pack
charging level
(Fig. B)
Check battery pack charge level: Press
o
the
button
[
LEDs
light up:
[
]
LED
[
]
Red/orange/green
Red/orange
Red
Charging the battery pack
(Fig. C)
NOTE
The battery pack
u
at any time without reducing its life.
Interrupting the charging process
u
does not damage the battery
pack
.
[
]
to
[
6 ]
into
[
5 ]
.
[
]
(Fig. D).
[
]
to the handle and slide
. The charging level
]
Charging level
Maximum
Medium
Low
may be charged
[
]