Parkside Performance PABSP 20 LI C4 Bedienungsanleitung Und Originalbetriebsanleitung Seite 10

Rapid battery charger PLG 20 C3 *
Input:
Rated voltage:
Rated frequency:
Rated power:
Fuse (internal):
Output:
Rated voltage:
Charging current:
Protection class:
Recommended ambient temperature:
While charging:
During operation:
During storage:
Noise emission value
The measured values have been
determined in accordance with EN 62841.
The A-rated noise level of the power tool
is typically as follows:
Sound pressure level L
Uncertainty K :
pA
Sound power level L
Uncertainty K :
WA
Vibration emission value
Vibration total values (triaxial vector sum)
determined according to EN 62841:
Drilling into metal:
Hand/arm vibration a
Uncertainty K:
* Battery and rapid battery charger are not included
8 GB
230–240 V ~
50 Hz
120 W
3.15 A/
21.5 V
4.5 A
II/
+4 °C to +40 °C
+4 °C to +40 °C
+20 °C to +26 °C
: 83 dB
pA
5 dB
: 91 dB
WA
5 dB
: 2.93 m/s
2
h,D
1.5 m/s
2
WARNING!
m
Wear ear protection!
WARNING!
m
The vibration and noise emissions
u
during actual use of the power tool
can differ from the declared values
depending on the manner in which
the tool is used, especially what kind
of workpiece is processed.
Try to minimise exposure to vibration
and noise. Examples of measures
to reduce vibration include wearing
gloves when using the tool and
limiting working time. All parts of the
operating cycle must be taken into
account (e.g. times when the power
tool is switched off and when it is
running idle in addition to the trigger
time).
NOTE
The declared vibration total value
u
and the declared noise emission
value have been measured in
accordance with a standard test
method and may be used for
comparing one tool with another.
The declared total vibration value
u
and the declared noise emission
value may also be used for a
preliminary assessment of exposure.