React AIR Bedienungsanleitung Seite 32

8 PULSE P-30~230 BPM
Manual
9
Program
INTERVAI
10
20-10
INTERVAI
11
10-20
INTERVAL
12
CUSTOM
TARGET
13
TIME
TARGET
14
DISTANCE
TARGET
15
CALORIES
TARGET
16
STROKES
TARGET
17
PULSE
18 ON/OFF
0-30~230
yes
(±1)BPM
a. When there is a pulse signal input
the time for displaying the initial value
is 7.3 seconds(counted by the first
PLUSE).
b. After no pulse signal input for 6
seconds, the data will be "0" .
yes
c. Above the set value, the Pulse
window value flashes per second or
PULSE OVER ALARM=2
ALARM/sec, which is BIBl per
second.
When no mode is entered QUICK START
is performed when an RPM signal is
detected.
1. Interval exercise mode.
2. Exercise for 20 seconds, rest for 10
seconds.
1. Interval exercise mode.
2. Exercise for 20 seconds, rest for 10
seconds.
1. Interval exercise mode.
2. Exercise for 20 seconds, rest for 10
seconds.
User set exercise time.
User set exercise distance.
User set exercise CALORIES.
User set exercise STROKES.
User set exercise pulse.
Bluetooth switch key.