Display Information; Set Language - Sika Rcm 880 Betriebsanleitung

RCM 880 / 890
5.3.6 Set Temperature Output
Transmitter Set temperature output

 Set the start and end values and the output
for temperature.
The adjustable value range is between -40
•
and 85 °C.
 Set the requested output signal.
5.3.7 Set Air Pressure Output
Transmitter  Set air pressure output
 Set the start and end values and the output
for air pressure.
The adjustable value range is between 300
•
and 1200 mbar.
 Set the requested output signal.
5.3.8 Averaging
Transmitter  Averaging
 Set how many values should be used for
the average value. The moving average
takes into account the last x measured val-
ues.
When averaging is activated, a "
•
in the bottom right corner of the main view.

5.3.9 Display Information

System menu  Display information
Various information about the transmitter and
sensor is displayed here.

5.3.10 Set Language

System menu Set language

 Set the menu language (English or Ger-
man).
Technical changes reserved
⌀
" appears
Commissioning and Operation
- 41 -