Commissioning And Operation; Main View; Graphs - Sika Rcm 880 Betriebsanleitung

Commissioning and Operation

5 Commissioning and Operation
Commissioning
The room condition monitor has no switch. As soon as the supply voltage is active, it
switches on automatically and starts up. After the start screen the main display with the
measured values appears. The room condition monitor displays three predefined analogue
outputs. The following output signals are available: 0...20 mA or 4...20 mA or 0...10 V or
0...5 V.
Operation
You can operate the room condition monitor with the capacitive controls. For the main and
curve view, the key assignments are shown in the following sections. The settings menu
shows the key assignment on the display.

5.1 Main View

⌀
In the main view, the currently measured values
for air humidity, temperature and air pressure
are displayed. If " " is displayed at the bottom
right, averaging is activated ( p. 41)
Button
/
Call up the settings menu
/

5.2 Graphs

 Press the button in the main view to call up the graphs.
The graphs show the measured values for air
humidity, temperature and air pressure over
time.
Button
/
/
- 38 -
Function
Change view
Call up graphs
Function
Change measurand
Change resolution
Call up the main view
© SIKA • Ba_RCM880_890 • 04/2025
RCM 880 / 890