Safety Instructions - Sika Rcm 880 Betriebsanleitung

RCM 880 / 890
1

Safety Instructions

Read the operating manual carefully. Follow all instructions and notices to prevent injury or
damage to property.
Intended use
The room condition monitor may only be used to measure and display air humidity, tempera-
ture and air pressure.
WARNING
The room condition monitor is not a safety component in accordance with Di-
rective 2006/42/EC (Machine Directive).
 Never use the device as a safety component.
The operational safety of the device supplied is only guaranteed by intended use. The speci-
fied limits ( p. 47) may under no circumstances be exceeded.
Qualified personnel
The personnel in charge of the installation, operation and maintenance of the device
•
must hold a relevant qualification. This can be based on training or relevant instructions.
The electrical connection may only be carried out by a fully qualified electrician.
•
General safety instructions
Degree of protection according to EN 60529:
•
Ensure that the ambient conditions at the place of use do not exceed the requirements of
the specified degree of protection ( p. 47).
Only use the device in perfect condition. Damaged or faulty devices must be checked im-
•
mediately and replaced if necessary.
Do not remove or destroy type plates or other markings on the device, or the warranty is
•
rendered null and void.
Technical changes reserved
Safety Instructions
- 27 -