Storage; Disposal And Protection Of The Environment; Technical Data - Grizzly ERT 320 Originalbetriebsanleitung

GB
1. Disconnect from the mains.
2. Press both locking mechanisms
on the reel cover (15) at the
same time and take off the cov-
er.
3. Remove the thread reel (12)
from the cutting head (11).
4. Turn the replacement thread reel
( 6) anticlockwise and take it
out of the holder (
5. Thread the two ends of the
thread through the thread outlet
eyes (16) and place the replace-
ment thread reel (6) on the cut-
ting head (11). Ensure that the
spring (17) is located correctly.
6. Fit the reel cover (15). It clicks in
audibly.
Check the line cutter. Never
operate the trimmer without the
line cutter or if the line cutter is
defective. Replace a defective
thread cutter. Risk of injury.

Storage

• Store the trimmer in a dry place well
out of reach of children.
• Do not expose the trimmer for extend-
ed periods to direct sunlight.
• Do not wrap plastic sacks around the
trimmer as this could result in the for-
mation of moisture and mould.
• Do not stand the trimmer on its pro-
tective cover. Suspend it by its upper
handle in such a manner that the
protective cover does not come into
contact with other objects. This is be-
cause the protective cover could be-
come deformed, thereby changing its
dimensions and its safety properties.
22
Disposal and protection
of the environment
Dispose of the trimmer, its accessories
and the packaging in an environment-
friendly manner.
5).
Hand in a redundant trimmer to a recy-
cling centre. The plastic and metals can
then be sorted out and graded for recy-
cling. Our Service Centre will be happy to
answer any questions in this respect.
Defective units returned to us will be dis-
posed of for free.

Technical data

Electric lawn trimmer .............. ERT 320
Rated input voltage.............230 V~, 50 Hz
Power input..................................... 320 W
Idling speed ............................ 11200 min
Protection Class .................................
Protection category ........................... IP20
Weight without cable .......................1.5 kg
Dual line................. 2 x 3 m, tap automatic
Cutting circle dual line .............. 250 mm
Line thickness dual line ............. 1.2 mm
Sound pressure level
(L
Sound power level (L
guaranteed ............................ 96 dB (A)
measured ........... 92 dB(A); K
Vibration at the handle
(a
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. The vibration and noise
measuring processes in accordance with
Electrical appliances must not be
disposed of with the domestic wa-
ste
) ......................82 dB(A), K
pA
wA
) ............................................... 1.5 m/s
n
=3 dB(A)
pA
)
=3 dB(A)
wA
-1
II
2