Assembly - Rex Functional-Trainer Bedienungsanleitung

Assembly

The Functional Trainer can be used at home as well as during
travels.
WARNING
Make sure that the training surface slip and enough
space around the device. we recommend a radius of at
least about 1–1.5 meters. Remove all sharp objects in
addition in the vicinity.
A Assembly with carabiner/Anchor strap
DANGER
Make sure beforehand that the anchorage object will
with stand your weight. Danger of breakage and accident!
We urgently recommend you wind the anchor strap
around the anchoring object several times to prevent
slippage. The straps may not be twisted or knotted. Risk
of accident!
1. Sling the anchor strap (2) several times around the ob-
ject.
2. Clip on the carabiner (1) for safety (see Fig.).
GB-22
REX_Trainer_Functional.indd GB-22 REX_Trainer_Functional.indd GB-22
B Assembly with door anchor
DANGER
The Functional Trainer may only be fastened to solidly
constructed doors. Do not use sliding doors, glass doors
or light cabinet doors for the assembly. Make sure that
the door will withstand your weight. Danger of breakage
and accident! The straps may not be twisted or knotted.
Risk of accident!
Positioning the door anchor
1. Use only doors that open out away from you.
2. Place the counter support of the door anchor (9) centred
behind the door (see Fig.).
3. Close the door and lock it for safety, if possible.
4. Carefully put your weight on the anchorage before begin-
ning with your workout (see Fig.).
Assembly
08.05.12 09:55 08.05.12 09:55