Parts List; Assembly - Rex Mini Cycle Bedienungsanleitung

Part list · Assembly

Parts list

No. Description
1 Main frame
2 Foot front
3 Foot rear
4L Pedal left
4R Pedal right
5 M5 Screw
6 M5 pin
7 Display
8 Pedal crank
9 Resistance controller
10 Plate

Assembly

The fi tness machine is largely pre-assembled.
1. It will only be necessary to assemble both feet (2, 3) to
the main frame (1) using the plates (10) and the screws
(5, 6) included in the delivery.
2. Also, the pedals (4L, 4R) must be attached to the pedal
cranks (8). During the assembly, make sure that both pe-
dals are installed on the respectively correct side, other-
wise they could break out. The right pedal is screwed in
clockwise and the left pedal is screwed in anti-clockwise.
For better identifi cation. Tighten both pedals fi rmly!
To insert or replace the battery, carefully pull up the display
(7) out of the main frame (1).
REX_Trainer_Minicycle12.indd GB-17 REX_Trainer_Minicycle12.indd GB-17
All manuals and user guides at all-guides.com
Quantity
1
1
1
1
1
4
4
1
1
1
2
WARNING
Use only batteries of the type: AAA 1.5 V.
After inserting the batteries, gently set the display (7)
back on the main frame (1), as the batteries may other-
wise lose contact.
GB-17
09.05.12 13:08 09.05.12 13:08