KTM 660 RALLY 2004 Bedienungsanleitung Seite 31

1
A A
5
6
– Coat the thread of the screw
2
however, do not tighten it yet.
– Push the slide pin
the extreme right and tighten the screw
3
– Now, the distances
Then, turn the cable disc and check if the throttle valve moves smoothly.
– Mount the jet needle and secure it with the screw
– Position the slide cover and gasket and fasten with 2 screws.
4
– Connect the hose
– Insert the 2 hose connections into the bores and fasten them with the
retaining clip
1
with Loctite 243 and mount the screw,
2
inward. At the same time, push the slide lever
1
A
on the left and on the right should be identical.
5
.
6
.
3
.
4
.
to
31