KTM 660 RALLY 2004 Bedienungsanleitung Seite 25

1
2
4
5
Disassembling the carburetor (Keihin CR 39)
Note: Before you start disassembling the carburetor, you should look for a
clean workplace. It should offer you enough space to lay out all individual
components of the carburetor in perfect order.
– Dismount the carburetor and remove any coarse dirt.
– Remove the wire clip
carburetor.
– Disconnect the hose
– Remove the 2 bolts
gasket.
– Remove the bolt
– Remove the bolt
6
1
and pull the ventilation hoses out of the
2
.
4
and dismount the slide cover together with its
5
and take the jet needle out of the throttle valve.
6
.
25