Heating Operation - Hitachi Ras-5101Ch Servicehandbuch

HEATING OPERATION
Press the FUNCTION selector so that the display indicates
@ (HEAT).
Set the desired room temperature with the TEMPERATURE
buttons (the display indicates the setting).
The range of 18-22°C is recommended as
the room temperature for heating.
lf the temperature setting is 20, the room
temperature will be controlled at around
20°C. ,
The temperature setting and the actual room temperature
may vary somewhat depending on conditions.
Set the desired FAN SPEED with the -+ (FAN SPEED)
button (the display indicates the setting).
© (AUTO): The FAN SPEED is HI at first and varies to
MED or LOW automatically when the preset
temperature has been reached.
(HI) |: Economical as the room will become warm
quickly.
But you may feel a chill at the beginning.
(MED) : Quiet.
(LOW) : More quiet.
Heating operation starts with LOW to prevent the emission of
cold air even if you select HI or MED.
Press the © (START/STOP) button. Heating operation
starts with a beep. Press the button again to stop opera-
tion.
ll As the settings are stored in memory in the remote controller,
you only have to press the M (START/STOP) button next time.
pressed, during the off-timer operates or when the outdoor heat exchanger is cold. This defrosting will last
for 5-10 minutes, indicated by lighting of the | (HOT KEEP) lamp.
= Fo