Hitachi RAS-5101CH Servicehandbuch Seite 25

HOW TO SET THE SLEEP TIMER
S| ti 1 hour-> 2 hours 3 hours ->7 hours
eeptimer | [7 ONT * Sleep timer off pubes
Sleep Timer: The device will continue working for the desig-
nated number of hours and then turn off.
Point the signal window of the remote controller toward the
indoor unit, and press the SLEEP button.
The timer information will be displayed on the remote controller. The
TIMER lamp lights with a beep from the indoor unit. When the sleep
timer has been set, the display indicates the turn-off time.
Example: If you set 3 hours sleep
°C NOOR
+
;
1
time at 11:38 p.m., the turn-off
BBY
JI 66
&) gon
The device will be turned off by the
sleep timer and turned on by on-timer.
SLEEP
2 Press the f](SLEEP) button and set the sleep timer.
ere For heating:
ie : 40 In this case, the device will turn
" off in 2 hours (at 1:38 a.m.) and
Hy On turn on early so that the preset
I : temperature be almost reached at
6:00 next morning.
Point the signal window of the remote controller toward the indoor unit, and press the O (CANCEL)
button.
The@ (RESERVED) sign goes out with a beep and the @) (TIMER) lamp turns off on the indoor unit.
ACAUTION
lf you set the sleep timer when the off-timer or
on/off-timer has been set earlier, the sleep timer
becomes effective instead of the off- or on/off-
timer set earlier.
= 23-